Ortho-ester-substituted diaryliodonium salts enabled regioselective arylocyclization of naphthols toward 3,4-benzocoumarins

• Ke Jiang,
• Cheng Pan,
• Limin Wang,
• Hao-Yang Wang and
• Jianwei Han

Beilstein J. Org. Chem. 2024, 20, 841–851, doi:10.3762/bjoc.20.76

• , herein, we utilized a copper catalyst to activate the C–I bond of diaryliodonium salts in the generation of aryl radicals, thus resulting in an annulation reaction with naphthols and substituted phenols. This approach yielded a diverse array of 3,4-benzocoumarin derivatives bearing various substituents

SOMOphilic alkyne vs radical-polar crossover approaches: The full story of the azido-alkynylation of alkenes

• Julien Borrel and
• Jerome Waser

Beilstein J. Org. Chem. 2024, 20, 701–713, doi:10.3762/bjoc.20.64

• ]. Moreover, different azide sources are known to efficiently promote the diazidation of alkenes in the presence of a copper catalyst, often proceeding via a radical mechanism [24][29][30][31]. A second approach would involve SOMOphilic alkynes to trap the radical by a purely open-shell mechanism (Scheme 1B

• a non-complexed copper catalyst formed during the transformation [24][51]. When iridium-based photocatalysts were tested, no product formation or only traces were observed (Table 2, entries 2 and 3). Using Ru(bpy)3Cl2·6H2O afforded 17% of 4a, a similar yield as with Cu(dap)2Cl with a reduced

Copper-catalyzed multicomponent reaction of β-trifluoromethyl β-diazo esters enabling the synthesis of β-trifluoromethyl N,N-diacyl-β-amino esters

• Youlong Du,
• Haibo Mei,
• Ata Makarem,
• Ramin Javahershenas,
• Vadim A. Soloshonok and
• Jianlin Han

Beilstein J. Org. Chem. 2024, 20, 212–219, doi:10.3762/bjoc.20.21

• efficient way for the synthesis of β-trifluoromethyl β-diacylamino esters. Furthermore, this reaction represents the first example of a Mumm rearrangement of β-trifluoromethyl β-diazo esters. Keywords: β-carbonyl diazo; copper catalyst; fluoroalkyl diazo; Mumm rearrangement; unsymmetrical β-diacylamino

• reacts with the copper catalyst generating the Cu-carbene intermediate B, which undergoes nucleophilic attack by acetonitrile to form the intermediate C. Subsequently, nucleophilic addition of benzoic acid to intermediate C affords the acetimidic anhydride D with the release of CuI catalyst for the next

Metal-catalyzed coupling/carbonylative cyclizations for accessing dibenzodiazepinones: an expedient route to clozapine and other drugs

• Amina Moutayakine and
• Anthony J. Burke

Beilstein J. Org. Chem. 2024, 20, 193–204, doi:10.3762/bjoc.20.19

• DBDA in a one-pot manner. In the first reaction, o-phenylenediamine (1a) and 2-bromophenylboronic acid (7) were reacted in a pressure flask under an inert atmosphere using copper iodide (CuI) as the copper catalyst, Et3N, and Mo(CO)6 as CO surrogate in the presence of Pd(OAc)2/XantPhos as catalytic

• (1a), followed by the oxygen-promoted insertion of the phenylboronic acid coupling partner 7 to deliver intermediate II that undergoes reductive elimination to give diarylamine 3a along with regeneration of the copper catalyst (Scheme 5). Then, a palladium-promoted oxidative addition of the C–Br bond

Copper-promoted C5-selective bromination of 8-aminoquinoline amides with alkyl bromides

• Changdong Shao,
• Chen Ma,
• Li Li,
• Jingyi Liu,
• Yanan Shen,
• Chen Chen,
• Qionglin Yang,
• Tianyi Xu,
• Zhengsong Hu,
• Yuhe Kan and
• Tingting Zhang

Beilstein J. Org. Chem. 2024, 20, 155–161, doi:10.3762/bjoc.20.14

• intermediate C is then generated, followed by the combination of the bromine anion with intermediate B. Finally, selective C5 bromination is accomplished via aromatic electrophilic substitution of 1a with intermediate C promoted by the copper catalyst to afford the desired product 3aa. Conclusion In summary

Morpholine-mediated defluorinative cycloaddition of gem-difluoroalkenes and organic azides

• Tzu-Yu Huang,
• Mario Djugovski,
• Sweta Adhikari,
• Destinee L. Manning and
• Sudeshna Roy

Beilstein J. Org. Chem. 2023, 19, 1545–1554, doi:10.3762/bjoc.19.111

• did not improve the yields when a cyano group was present on the azide handle. In fact, the use of CuSO4 with the cyano group lowered the yield (31%, see entry 12 in Table 1) which might be due to a coordination of the copper catalyst with the cyano group hindering the triazole formation [37]. The

N-Sulfenylsuccinimide/phthalimide: an alternative sulfenylating reagent in organic transformations

• Fatemeh Doraghi,
• Seyedeh Pegah Aledavoud,
• Mehdi Ghanbarlou,
• Bagher Larijani and
• Mohammad Mahdavi

Beilstein J. Org. Chem. 2023, 19, 1471–1502, doi:10.3762/bjoc.19.106

• the presence of N-(2-bromophenylthio)succinimide 1’ and copper catalyst led to intermolecular sulfenoamination of alkenes and subsequent C–N coupling to produce dihydrobenzothiazine structures 27 in a one-pot manner. Furthermore, deprotection of the amine unit by K2CO3 and Na metal was performed in

Application of N-heterocyclic carbene–Cu(I) complexes as catalysts in organic synthesis: a review

• Nosheen Beig,
• Varsha Goyal and
• Raj K. Bansal

Beilstein J. Org. Chem. 2023, 19, 1408–1442, doi:10.3762/bjoc.19.102

Copper-catalyzed N-arylation of amines with aryliodonium ylides in water

• Kasturi U. Nabar,
• Bhalchandra M. Bhanage and
• Sudam G. Dawande

Beilstein J. Org. Chem. 2023, 19, 1008–1014, doi:10.3762/bjoc.19.76

• , catalyzed by a copper catalyst [39]. Murphy and co-workers reported blue LED-mediated metal-free cyclopropanation of alkenes with iodonium ylides through a diradical intermediate [40]. However, iodonium ylides are relatively unexplored for the arylation of amines. So far only Spyroudis’s group reported N

• 35% yield (Table 1, entry 2). When the reaction was carried out at 60 °C the product yield was improved to 49% with complete consumption of starting materials in 4 hours (Table 1, entry 3). Next, to examine the role of the copper catalyst, we screened a variety of Cu(II) salts, namely, Cu(OAc)2

Synthesis of aliphatic nitriles from cyclobutanone oxime mediated by sulfuryl fluoride (SO₂F₂)

• Xian-Lin Chen and
• Hua-Li Qin

Beilstein J. Org. Chem. 2023, 19, 901–908, doi:10.3762/bjoc.19.68

• Scheme 5. Under the promotion of the base, cyclobutanone oxime preliminarily reacts with SO2F2, generating the activated precursor fluorosulfonate, which further reacts with the alkene 2a in the presence of the copper catalyst under Ar atmosphere for 9 h (Scheme 5a). The corresponding product was

Inline purification in continuous flow synthesis – opportunities and challenges

• Jorge García-Lacuna and
• Marcus Baumann

Beilstein J. Org. Chem. 2022, 18, 1720–1740, doi:10.3762/bjoc.18.182

• -butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine on polystyrene) which is valuable for reaction scale-ups [75] is used. Alternatively, a CuAAc (copper-catalyzed azide–alkyne cycloaddition) reaction has been demonstrated where the copper catalyst is supported on an Amberlist A-21 resin

Total synthesis of grayanane natural products

• Nicolas Fay,
• Rémi Blieck,
• Cyrille Kouklovsky and
• Aurélien de la Torre

Beilstein J. Org. Chem. 2022, 18, 1707–1719, doi:10.3762/bjoc.18.181

• and 23 steps) to access grayananes with a cyclopentenone moiety on the A ring. It should be noted that although this is a racemic synthesis, intermediate 37 was also synthesized in enantioenriched form using a chiral copper catalyst for the cyclopropanation and a chiral auxiliary on the ester moiety

Preparation of β-cyclodextrin-based dimers with selectively methylated rims and their use for solubilization of tetracene

• Konstantin Lebedinskiy,
• Volodymyr Lobaz and
• Jindřich Jindřich

Beilstein J. Org. Chem. 2022, 18, 1596–1606, doi:10.3762/bjoc.18.170

• most crucial restriction in coupling two CD units by propargyl ether is the volatility of the latter compound. Thus, we discovered that performing the reaction at room temperature, prolonging the reaction time, and using an equivalent amount of the copper catalyst resulted in the best yields. Another

Synthesis of novel alkynyl imidazopyridinyl selenides: copper-catalyzed tandem selenation of selenium with 2-arylimidazo[1,2-a]pyridines and terminal alkynes

• Mio Matsumura,
• Kaho Tsukada,
• Kiwa Sugimoto,
• Yuki Murata and
• Shuji Yasuike

Beilstein J. Org. Chem. 2022, 18, 863–871, doi:10.3762/bjoc.18.87

• reagents and 1,3-dipolar azide–alkyne cycloaddition based on the alkyne moiety. Keywords: alkynyl imidazopyridinyl selenide; copper catalyst; imidazo[1,2-a]pyridine; selenium; tandem reaction; terminal alkyne; Introduction Imidazo[1,2-a]pyridines are important heterocycles that serve as key functional

Inductive heating and flow chemistry – a perfect synergy of emerging enabling technologies

• Conrad Kuhwald,
• Sibel Türkhan and
• Andreas Kirschning

Beilstein J. Org. Chem. 2022, 18, 688–706, doi:10.3762/bjoc.18.70

• reactors (Scheme 12, case A). There, it performs a second role by also becoming a source for a copper catalyst, either by being released into solution or by acting as a surface-active species capable of promoting "click" reactions between alkynes and azides [76][77][78][79][80][81]. The process can be

Direct C–H amination reactions of arenes with N-hydroxyphthalimides catalyzed by cuprous bromide

• Dongming Zhang,
• Bin Lv,
• Pan Gao,
• Xiaodong Jia and
• Yu Yuan

Beilstein J. Org. Chem. 2022, 18, 647–652, doi:10.3762/bjoc.18.65

• (40 mol %) in the presence of P(OEt)3 (6 equiv, triethyl phosphite) under air at 100 °C (Table 1). The yield of the corresponding amide 3a was 78% (Table 1, entry 1). The reaction was completely inhibited in the absence of the copper catalyst or P(OEt)3, and no product was detected (Table 1, entries 2

Unexpected chiral vicinal tetrasubstituted diamines via borylcopper-mediated homocoupling of isatin imines

• Marco Manenti,
• Leonardo Lo Presti,
• Giorgio Molteni and
• Alessandra Silvani

Beilstein J. Org. Chem. 2022, 18, 303–308, doi:10.3762/bjoc.18.34

• most effectively, further promoting the conversion of the substrate. Other changes in reaction conditions, such as heating at 70 °C, increasing the amount of copper catalyst to 10 mol % and switching the copper salt from CuSO4 to the more soluble Cu(OTf)2, did not improve the yield significantly (Table

Visible-light-mediated copper photocatalysis for organic syntheses

• Yajing Zhang,
• Qian Wang,
• Zongsheng Yan,
• Donglai Ma and
• Yuguang Zheng

Beilstein J. Org. Chem. 2021, 17, 2520–2542, doi:10.3762/bjoc.17.169

• chlorosulfonylated products 8 and 9, whereas replacing the copper catalyst by ruthenium-based, iridium-based, and eosin Y catalysts afforded the desired products only in trace amount. Unexpectedly, the corresponding CuII complex, Cu(dap)Cl2, also produced the desired product with good yield. Based on the literature

• ester acted as an ideal radical precursor and accepted a single electron from the excited state CuI-acetylide complex. The copper catalyst plays a dual role, namely, as a photoredox catalyst and a cross-coupling catalyst. NHP-type esters inhibited the homodimerization of the alkyl radical and terminal

Copper-catalyzed monoselective C–H amination of ferrocenes with alkylamines

• Zhen-Sheng Jia,
• Qiang Yue,
• Ya Li,
• Xue-Tao Xu,
• Kun Zhang and
• Bing-Feng Shi

Beilstein J. Org. Chem. 2021, 17, 2488–2495, doi:10.3762/bjoc.17.165

• %), largely due to the poison of copper catalyst by thioether. Acyclic amines were also tested and the amination products were obtained in low yields (4n, 18%; 4o, 15%). Unfortunately, primary amines and anilines were completely inert. Encouraged by the above results, we further tried to synthesize ferrocene

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• formed, which trough the CuAAC path generates the C5-cuprate triazole intermediate 115. The oxidative addition of arylboronic acid to the copper center forms the intermediate 116. The reductive elimination occurs to give the corresponding triazole 112 and to reform the copper catalyst for the next run

• complex (ʟ-proline-MCM-41-CuCl) was obtained by the reaction of ʟ-proline-MCM-41 with CuCl in acetone at mild temperature (Scheme 21) [51]. A possible mechanism for this reaction is shown in Scheme 22. Initially, copper(I)-substituted acetylide intermediate 70 is produced via the reaction of copper

• catalyst with the corresponding acetylide by using LiOt-Bu. Further intermolecular [3 + 2]-cycloadditions of azide 67 with intermediate 70 affords a 5-copper(I)-substituted triazolide intermediate 71. The oxidative addition of 1-bromoalkyne 68 forms an alkyne–Cu(III)Br–triazole complex intermediate 72

Helicene synthesis by Brønsted acid-catalyzed cycloaromatization in HFIP [(CF₃)₂CHOH]

• Takeshi Fujita,
• Noriaki Shoji,
• Nao Yoshikawa and
• Junji Ichikawa

Beilstein J. Org. Chem. 2021, 17, 396–403, doi:10.3762/bjoc.17.35

• -Dimethylformamide (DMF) was purified by a solvent-purification system (GlassContour) equipped with columns of activated alumina and supported-copper catalyst (Q-5) before use. 1,1,1,3,3,3-Hexafluoropropan-2-ol (HFIP) was distilled from molecular sieves 4 Å and stored over activated molecular sieves 4 Å. 1,4-Dioxane

A novel and robust heterogeneous Cu catalyst using modified lignosulfonate as support for the synthesis of nitrogen-containing heterocycles

• Bingbing Lai,
• Meng Ye,
• Ping Liu,
• Minghao Li,
• Rongxian Bai and
• Yanlong Gu

Beilstein J. Org. Chem. 2020, 16, 2888–2902, doi:10.3762/bjoc.16.238

• ; heterogeneous catalyst; immobilized copper catalyst; lignosulfonate; nitrogen-containing heterocycles; solid acid; Introduction Heterogeneous metal catalysts have been continuously receiving considerable attention in the field of organic synthesis owing to the advantages of easy separation and recycling [1][2

Using multiple self-sorting for switching functions in discrete multicomponent systems

• Amit Ghosh and
• Michael Schmittel

Beilstein J. Org. Chem. 2020, 16, 2831–2853, doi:10.3762/bjoc.16.233

• binding site to nanoswitch [Cu(68)]+ preventing its action as an organocatalyst (OFF-1), while the copper catalyst [Cu(69)]+ was available to catalyze a click reaction between 4-nitrophenylacetylene (47) and benzyl azide (46) (ON-2). The addition of 1 equiv of phenanthroline 69 to the state SelfSORT-I

Recent developments in enantioselective photocatalysis

• Callum Prentice,
• James Morrisson,
• Andrew D. Smith and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2020, 16, 2363–2441, doi:10.3762/bjoc.16.197

Synthetic approaches to bowl-shaped π-conjugated sumanene and its congeners

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 2212–2259, doi:10.3762/bjoc.16.186

• followed by the addition of CuI through an intermediate 11. This procedure provided a very low yield (7%) of a mixture of 12 (syn) and 13 (anti) products. Therefore, they opted an alternative route which involves the formation of organotin compound 14 followed by trimerization in the presence of copper

• catalyst 15 to yield the trimerized products 12 (syn) and 13 (anti) in respectable yields (Scheme 2). The alkene-bridge exchange of 12 (syn) was accomplished by tandem ring-opening and ring-closing metathesis (ROM–RCM) in the presence of Grubbs’ first generation (G-I) catalyst to generate a C3-symmetric